dmesg - Packet Type 0 x86

Return To Packet Type 0 x86 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.4.0-47-generic (buildd@lcy01-03) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.2) ) #68-Ubuntu SMP Wed Oct 26 19:39:52 UTC 2016 (Ubuntu 4.4.0-47.68-generic 4.4.24)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007f0c2fff] usable
BIOS-e820: [mem 0x000000007f0c3000-0x000000007f135fff] reserved
BIOS-e820: [mem 0x000000007f136000-0x000000007f1e0fff] usable
BIOS-e820: [mem 0x000000007f1e1000-0x000000007f44ffff] ACPI NVS
BIOS-e820: [mem 0x000000007f450000-0x000000007f649fff] reserved
BIOS-e820: [mem 0x000000007f64a000-0x000000007f7fffff] usable
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: Supermicro MBI-6418A-T5H/B1SA4-2550F, BIOS 2.0a 05/05/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-DFFFF write-through
  E0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 080000000 mask F80000000 uncachable
  1 base 280000000 mask F80000000 uncachable
  2 base 300000000 mask F00000000 uncachable
  3 base 400000000 mask C00000000 uncachable
  4 base 800000000 mask 800000000 uncachable
  5 base 07F800000 mask FFF800000 uncachable
  6 disabled
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
e820: last_pfn = 0x7f800 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd6c0-0x000fd6cf] mapped at [ffff8800000fd6c0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
BRK [0x02202000, 0x02202fff] PGTABLE
BRK [0x02203000, 0x02203fff] PGTABLE
BRK [0x02204000, 0x02204fff] PGTABLE
BRK [0x02205000, 0x02205fff] PGTABLE
BRK [0x02206000, 0x02206fff] PGTABLE
BRK [0x02207000, 0x02207fff] PGTABLE
RAMDISK: [mem 0x33e58000-0x35f23fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007F236088 000094 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007F239478 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000007F2361B8 0032BC (v02 ALASKA A M I    01072009 INTL 20061109)
ACPI: FACS 0x000000007F44DF80 000040
ACPI: FPDT 0x000000007F239588 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: SPMI 0x000000007F2395D0 000040 (v05 A M I  OEMSPMI  00000000 AMI. 00000000)
ACPI: MCFG 0x000000007F239610 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: WDAT 0x000000007F239650 0001AC (v01 ALASKA A M I    01072009 MSFT 00010013)
ACPI: UEFI 0x000000007F239800 000042 (v01                 00000000      00000000)
ACPI: APIC 0x000000007F239848 000078 (v03 INTEL  TIANO    00000001 MSFT 00000000)
ACPI: BDAT 0x000000007F2398C0 000030 (v01                 00000000      00000000)
ACPI: HPET 0x000000007F2398F0 000038 (v01 INTEL           00000001 MSFT 01000013)
ACPI: SSDT 0x000000007F239928 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20061109)
ACPI: HEST 0x000000007F23A320 0000A8 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
ACPI: BERT 0x000000007F23A3C8 000030 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
ACPI: ERST 0x000000007F23A3F8 000230 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
ACPI: EINJ 0x000000007F23A628 000150 (v01 INTEL  AVOTON B 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
NODE_DATA(0) allocated [mem 0x27fff5000-0x27fff9fff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000027fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000099fff]
  node   0: [mem 0x0000000000100000-0x000000007f0c2fff]
  node   0: [mem 0x000000007f136000-0x000000007f1e0fff]
  node   0: [mem 0x000000007f64a000-0x000000007f7fffff]
  node   0: [mem 0x0000000100000000-0x000000027fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000027fffffff]
On node 0 totalpages: 2093757
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3993 pages, LIFO batch:0
  DMA32 zone: 8077 pages used for memmap
  DMA32 zone: 516900 pages, LIFO batch:31
  Normal zone: 24576 pages used for memmap
  Normal zone: 1572864 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7f0c3000-0x7f135fff]
PM: Registered nosave memory: [mem 0x7f1e1000-0x7f44ffff]
PM: Registered nosave memory: [mem 0x7f450000-0x7f649fff]
PM: Registered nosave memory: [mem 0x7f800000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed03fff]
PM: Registered nosave memory: [mem 0xfed04000-0xfed07fff]
PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
PM: Registered nosave memory: [mem 0xfed09000-0xfed0bfff]
PM: Registered nosave memory: [mem 0xfed0c000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1cfff]
PM: Registered nosave memory: [mem 0xfed1d000-0xfeefffff]
PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0x7f800000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88027fc00000 s98008 r8192 d28968 u524288
pcpu-alloc: s98008 r8192 d28968 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2061019
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8124948K/8375028K available (8423K kernel code, 1285K rwdata, 3952K rodata, 1480K init, 1292K bss, 250080K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
	Build-time adjustment of leaf fanout to 64.
	RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:16640 nr_irqs:456 16
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS1] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2400.097 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.19 BogoMIPS (lpj=9600388)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
Freeing SMP alternatives memory: 32K (ffffffff820b5000 - ffffffff820bd000)
ftrace: allocating 32047 entries in 126 pages
smpboot: Max logical packages: 1
smpboot: APIC(0) Converting physical 0 to logical package 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Atom(TM) CPU  C2550  @ 2.40GHz (family: 0x6, model: 0x4d, stepping: 0x8)
Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000ffffffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19200.77 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x7f1e1000-0x7f44ffff] (2551808 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time:  2:31:11, date: 05/02/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88027639C800 000490 (v01 PmRef  Cpu0Ist  00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880275CDD400 0001FA (v01 PmRef  Cpu0Cst  00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF88027639D000 00047A (v01 PmRef  ApIst    00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880275CDD600 000119 (v01 PmRef  ApCst    00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0x280000000-0xfffffffff window]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:1f02] type 00 class 0x060000
pci 0000:00:01.0: [8086:1f10] type 01 class 0x060400
pci 0000:00:01.0: reg 0x10: [mem 0xdf180000-0xdf19ffff 64bit]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:1f11] type 01 class 0x060400
pci 0000:00:02.0: reg 0x10: [mem 0xdf160000-0xdf17ffff 64bit]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:1f12] type 01 class 0x060400
pci 0000:00:03.0: reg 0x10: [mem 0xdf140000-0xdf15ffff 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:0e.0: [8086:1f14] type 00 class 0x060000
pci 0000:00:0f.0: [8086:1f16] type 00 class 0x080600
pci 0000:00:0f.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: [8086:1f15] type 00 class 0x088000
pci 0000:00:13.0: reg 0x10: [mem 0xdf1ab000-0xdf1ab3ff 64bit]
pci 0000:00:14.0: [8086:1f45] type 00 class 0x020000
pci 0000:00:14.0: reg 0x10: [mem 0xdf120000-0xdf13ffff 64bit]
pci 0000:00:14.0: reg 0x18: [io  0xe060-0xe07f]
pci 0000:00:14.0: reg 0x20: [mem 0xdf1a4000-0xdf1a7fff 64bit]
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.1: [8086:1f45] type 00 class 0x020000
pci 0000:00:14.1: reg 0x10: [mem 0xdf100000-0xdf11ffff 64bit]
pci 0000:00:14.1: reg 0x18: [io  0xe040-0xe05f]
pci 0000:00:14.1: reg 0x20: [mem 0xdf1a0000-0xdf1a3fff 64bit]
pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1f2c] type 00 class 0x0c0320
pci 0000:00:16.0: reg 0x10: [mem 0xdf1aa000-0xdf1aa3ff]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [8086:1f32] type 00 class 0x010601
pci 0000:00:18.0: reg 0x10: [io  0xe0b0-0xe0b7]
pci 0000:00:18.0: reg 0x14: [io  0xe0a0-0xe0a3]
pci 0000:00:18.0: reg 0x18: [io  0xe090-0xe097]
pci 0000:00:18.0: reg 0x1c: [io  0xe080-0xe083]
pci 0000:00:18.0: reg 0x20: [io  0xe020-0xe03f]
pci 0000:00:18.0: reg 0x24: [mem 0xdf1a9000-0xdf1a97ff]
pci 0000:00:18.0: PME# supported from D3hot
pci 0000:00:1f.0: [8086:1f38] type 00 class 0x060100
pci 0000:00:1f.3: [8086:1f3c] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdf1a8000-0xdf1a801f]
pci 0000:00:1f.3: reg 0x20: [io  0xe000-0xe01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 02-03]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:03:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xdf000000-0xdf01ffff]
pci 0000:03:00.0: reg 0x18: [io  0xd000-0xd07f]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:02:00.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
ACPI: PCI Interrupt Link [LNKA] (IRQs 6 7 10 *11 12 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 6 7 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 6 7 10 11 12 *15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 6 7 *10 11 12 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 6 7 10 11 12 *15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 6 *7 10 11 12 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 6 7 10 11 12 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 6 7 10 *11 12 15)
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7f0c3000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f1e1000-0x7fffffff]
e820: reserve RAM buffer [mem 0x7f800000-0x7fffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
amd_nb: Cannot enumerate AMD northbridges
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:00: [mem 0x7f800000-0x7fffffff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [io  0x0680-0x069f] has been reserved
system 00:01: [io  0x0400-0x047f] could not be reserved
system 00:01: [io  0x0500-0x05fe] has been reserved
system 00:01: [mem 0xfed00000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed50000-0xfedfffff] has been reserved
system 00:01: [mem 0x000c0000-0x000dffff] could not be reserved
system 00:01: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:01: [mem 0xffa00000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io  0x0a00-0x0a0f] has been reserved
system 00:03: [io  0x0a10-0x0a1f] has been reserved
system 00:03: [io  0x0a20-0x0a2f] has been reserved
system 00:03: [io  0x0a30-0x0a3f] has been reserved
system 00:03: [io  0x0a40-0x0a4f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 6 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: PCI bridge to [bus 03]
pci 0000:02:00.0:   bridge window [io  0xd000-0xdfff]
pci 0000:02:00.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:02.0: PCI bridge to [bus 02-03]
pci 0000:00:02.0:   bridge window [io  0xd000-0xdfff]
pci 0000:00:02.0:   bridge window [mem 0xde000000-0xdf0fffff]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: resource 8 [mem 0x280000000-0xfffffffff window]
pci_bus 0000:00: resource 9 [mem 0xfed40000-0xfed44fff window]
pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xde000000-0xdf0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 33584K (ffff880033e58000 - ffff880035f24000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x7b0c3000-0x7f0c3000] (64MB) mapped at [ffff88007b0c3000-ffff88007f0c2fff]
Scanning for low memory corruption every 60 seconds
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1493692271.872:1): initialized
Initialise system trusted keyring
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.23)
Key type big_key registered
Allocating IMA MOK and blacklist keyrings.
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x3000020
intel_idle: v0.4.1 model 0x4D
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:05: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky 
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:16.0: EHCI Host Controller
ehci-pci 0000:00:16.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:16.0: debug port 2
ehci-pci 0000:00:16.0: cache line size of 64 is not supported
ehci-pci 0000:00:16.0: irq 23, io mem 0xdf1aa000
ehci-pci 0000:00:16.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.4.0-47-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:16.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
usb 1-1: new high-speed USB device number 2 using ehci-pci
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: CPU0 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU1 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU2 sig=0x406d8, pf=0x1, revision=0x122
microcode: CPU3 sig=0x406d8, pf=0x1, revision=0x122
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
usb 1-1: New USB device found, idVendor=8087, idProduct=07db
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
Loaded X.509 cert 'Build time autogenerated kernel key: f7bc719d96df7c6d6fed8f4b9fd5d4ff001383c8'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
  Magic number: 1:828:509
rtc_cmos 00:02: setting system clock to 2017-05-02 02:31:14 UTC (1493692274)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1480K (ffffffff81f43000 - ffffffff820b5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1804K (ffff88000183d000 - ffff880001a00000)
Freeing unused kernel memory: 144K (ffff880001ddc000 - ffff880001e00000)
random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
random: udevadm: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
tsc: Refined TSC clocksource calibration: 2399.997 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229834d6ac9, max_idle_ns: 440795285103 ns
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
[drm] Initialized drm 1.1.0 20060810
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
PTP clock support registered
ahci 0000:00:18.0: version 3.0
dca service started, version 1.12.1
ahci 0000:00:18.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:18.0: flags: 64bit ncq pm led clo pio slum part sxs deso sadm sds apst 
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
scsi host0: ahci
scsi host1: ahci
ata1: SATA max UDMA/133 abar m2048@0xdf1a9000 port 0xdf1a9100 irq 27
ata2: SATA max UDMA/133 abar m2048@0xdf1a9000 port 0xdf1a9180 irq 27
igb: Copyright (c) 2007-2014 Intel Corporation.
[drm] AST 2400 detected
[drm] Analog VGA only
[drm] dram 1632000000 1 16 01000000
[TTM] Zone  kernel: Available graphics memory: 4080996 kiB
usb 1-1.3: New USB device found, idVendor=0000, idProduct=0001
usb 1-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.3:1.0: USB hub found
hub 1-1.3:1.0: 4 ports detected
igb 0000:00:14.0: added PHC on eth0
igb 0000:00:14.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:00:14.0: eth0: PBA No: 010000-000
igb 0000:00:14.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
igb 0000:00:14.1: added PHC on eth1
igb 0000:00:14.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:00:14.1: eth1: PBA No: 010000-000
igb 0000:00:14.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:00:14.0 enp0s20f0: renamed from eth0
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
fbcon: astdrmfb (fb0) is primary device
igb 0000:00:14.1 enp0s20f1: renamed from eth1
Console: switching to colour frame buffer device 128x48
ast 0000:03:00.0: fb0: astdrmfb frame buffer device
[drm] Initialized ast 0.1.0 20120228 for 0000:03:00.0 on minor 0
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: INTEL SSDSC2BB120G6, G2010150, max UDMA/133
ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2BB12 0150 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata1.00: Enabling discard_zeroes_data
 sda: sda1 sda2 sda3
ata1.00: Enabling discard_zeroes_data
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb 1-1.3.1: new low-speed USB device number 4 using ehci-pci
md: linear personality registered for level -1
md: multipath personality registered for level -4
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
usb 1-1.3.1: New USB device found, idVendor=0557, idProduct=2419
usb 1-1.3.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
raid6: sse2x1   gen()   721 MB/s
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: HID 0557:2419 as /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/0003:0557:2419.0001/input/input2
raid6: sse2x1   xor()  2622 MB/s
hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:16.0-1.3.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:16.0/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:0557:2419.0002/input/input3
raid6: sse2x2   gen()   771 MB/s
hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:16.0-1.3.1/input1
raid6: sse2x2   xor()  3124 MB/s
raid6: sse2x4   gen()  1741 MB/s
raid6: sse2x4   xor()  1326 MB/s
raid6: using algorithm sse2x4 gen() 1741 MB/s
raid6: .... xor() 1326 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
clocksource: Switched to clocksource tsc
xor: measuring software checksum speed
   prefetch64-sse:  7912.000 MB/sec
   generic_sse:  7172.000 MB/sec
xor: using function: prefetch64-sse (7912.000 MB/sec)
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on multipathd control socket.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Load Kernel Modules...
Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
systemd[1]: Mounting Huge Pages File System...
Loading iSCSI transport class v2.0-870.
systemd[1]: Starting Device-Mapper Multipath Device Controller...
device-mapper: multipath: version 1.10.0 loaded
systemd[1]: Starting Journal Service...
iscsi: registered transport (tcp)
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
iscsi: registered transport (iser)
systemd[1]: Mounting Debug File System...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Starting Remount Root and Kernel File Systems...
EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target Paths.
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Created slice system-serial\x2dgetty.slice.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Journal Service.
systemd-journald[267]: Received request to flush runtime journal from PID 1
ipmi message handler version 39.2
ipmi_si IPI0001:01: ipmi_si: probing via ACPI
ipmi_si IPI0001:01: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
IPMI System Interface driver.
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
SSE version of gcm_enc/dec engaged.
ipmi_si IPI0001:01: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
Adding 1996796k swap on /dev/sda2.  Priority:-1 extents:1 across:1996796k SSFS
ipmi_si IPI0001:01: Found new BMC (man_id: 0x002a7c, prod_id: 0x0661, dev_id: 0x20)
ipmi_si IPI0001:01: IPMI kcs interface initialized
IPMI SSIF Interface driver
gpio_ich: GPIO from 452 to 511 on gpio_ich
bond0: Setting xmit hash policy to layer3+4 (1)
bond0: Setting MII monitoring interval to 100
bond0: Setting down delay to 200
bond0: Setting up delay to 200
IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
bond0: Adding slave enp0s20f0
bond0: Enslaving enp0s20f0 as an active interface with a down link
igb 0000:00:14.0 enp0s20f0: igb: enp0s20f0 NIC Link is Up 2500 Mbps Full Duplex, Flow Control: RX/TX
bond0: link status up for interface enp0s20f0, enabling it in 0 ms
bond0: link status definitely up for interface enp0s20f0, 2500 Mbps full duplex
bond0: making interface enp0s20f0 the new active one
bond0: first active interface up!
IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
bond0: Adding slave enp0s20f1
bond0: Enslaving enp0s20f1 as an active interface with a down link
random: nonblocking pool is initialized
perf interrupt took too long (2542 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
perf interrupt took too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000

Return To Packet Type 0 x86 System Information